Powerplay Owner’s Manual
44
E
NGLISH
Maintenance
Periodic maintenance and
adjustment checklist
Checklist
Notes
500KM
1000KM
1500KM 2000KM
2500KM
Bicycle chain - inspect for
wear, clean and lube
Before each ride
Check condition (stretch,
cracks) and lubricate
Charge port
Before each charge
Check for water intrusion,
corrosion, pin alignment & dirt
Torque sensor - calibration
OR each time you replace a
component of the drive system
or drivetrain
Motor mount screws
Check for proper torque
Drive pinion & lockring
Check condition; replace
whenever worn to the limit
Torque sensor & idler pulley
Check for cracks or damage
Motor casing & covers
Check for cracks or damage
Motor cables
Check for insulation or
connector damage
Battery casing
Inspect each time battery is out of the bike
Check for casing or connector
damage
Handlebar remote & cable
Check for casing or connector
damage
Toptube display & cable
Check for excessive play &
screen damage
Downtube extension cable
Check for casing or connector
damage
Speed sensor & cable
Inspect each time wheel is off the bike
Check for casing or connector
damage; ensure magnets are
well secured
Transfer chain - clean and
lube
Check condition and lubricate
Transfer chain - replace
Replace every 2500KM
Check condition to avoid internal
motor wear and noise
Motor clutch
bearing - replace
Replace every 2500KM
Check bearing for smooth
operation
Spider clutch
bearing - replace
Replace every 2500KM
Check bearing for smooth
operation
