Powerplay Owner’s Manual
42
E
NGLISH
• Remove cable port (carbon) or rubber grommet (alloy) on the left side of the
downtube.
• Remove old hose. Measure new hose to match length.
• Working back to front, install the hose on the caliper, and run along the chainstay to
the lower hole at the back of the seat tube.
• Run the brake hose in the top portion of the cable tray and into the downtube.
•
Run the brake hose in the cable collector, pull taut, and fix the cable collector in the
downtube with the 3 mm hex screw.
• Fasten the hose, cables and wires to the cable tray on the drive side of the motor
with zip ties.
• Pull the brake hose out of the left side port hole by the head tube, and reinstall the
cover or grommet.
• Reinstall the drive side motor cover.
• Reinstall battery.
