To order parts and supplies: 800.343.9353 >> eastwood.com
5
SET-UP
• Using a good quality Teflon sealing tape (Not Included), thread the 1/4” MNPT threads of
the Inline Oiler into the NPT threads of the Male Quick Disconnect Inlet Fitting and tighten
securely
(FIG 1)
.
• Once again, apply Teflon sealing tape (not included) onto the male 1/4” NPT threads of the
Air Hose fitting then thread it into the Inline Oiler and tighten securely
(FIG 1)
.
• Fill the included Oil Bottle with a good quality air tool oil. Remove the Phillips head screw
oil-fill plug of the Inline Oiler. Using the needle spout of the Oil Bottle, fill the Inline Oiler.
Replace oil-fill plug
(FIG 1)
.
FIG. 1
✓
Full
Closed
INJURY HAZARD!
To avoid injury, always disconnect air supply to the Micro Pencil Die Grinder
before installing or replacing accessories.
INJURY HAZARD!
To avoid injury, only use accessories balanced and rated for High-RPM,
(54,000 or greater) use.
Full
Open
Throttle
Fill Plug Screw
✓
Air Hose
✓
✓
Inline Oiler
✓
1/4" Fitting
9mm
Wrenches
✓
✓
Collet
✓
Slots
Flats
✓
✓
