4
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
INJURY HAZARD!
• This tool uses high-speed, highly abrasive cutting surfaces which can
quickly cause injury. Keep fingers and hands away from moving parts when
operating. Wear thick, well-fitting work gloves and keep loose clothing,
sleeves, cords, jewelry and hair away from moving parts.
• This tool will eject sparks at high speed which can ignite flammable
materials or injure others nearby. Do not operate near flammable
materials and keep all persons and pets away from the work area.
• Do not force tool or exert excessive side forces on tool while in use as
accessories can bend or disintegrate causing them to fragment and
eject sharp pieces at high velocity.
• Always make sure the workpiece is securely clamped or anchored to
avoid sudden movements which could result in injury.
• Frequently inspect accessory and tool condition. If damage develops, dis-
continue tool use immediately and replace damaged accessory. ONLY USE
replacement 1/8” shank accessories rated for 54,000 RPM or greater use,
otherwise severe injury or death can result in the event of accessory failure.
VIBRATION INJURY HAZARD!
• This tool will vibrate during use! Repeated exposure to vibration may cause
physical injury. Always disconnect tool from air supply when changing ac-
cessories to prevent accidental tool starting and potential severe injury.
