9
13MM DRILL PRESS
EN
any other conditions that may affect its operation.
- A guard or other part that is damaged should be
properly repaired or replaced by an authorized
service centre unless otherwise indicated in this
instruction manual.
- Have defective switches replaced by an
authorized service centre.
- Do not use the tool if the switch does not turn it on
and off.
21. Warning
- The use of any accessory or attachment other
than one recommended in this instruction
manual may present a risk of personal injury.
22. Have your tool repaired by a qualified person
- This electric tool complies with the relevant
safety rules. Repairs should only be carried out
by qualified persons using original spare parts,
otherwise this may result in considerable danger
to the user.
23. If the replacement of the supply cord
is necessary, this has to be done by the
manufacturer or his agent in order to avoid a
safety hazard.
24. For tools intended to be connected to a water
supply:
- Replacement of the plug or the supply cord shall
always be carried out by the manufacturer of the
tool or his service organisation,
- Keep water clear off the electrical parts of the
tool and away from persons in the working area.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
RCM marking
TECHNICAL DATA
Type RT7053(RT, RS-designation of machinery,
representative of Pillar Drill)
RT7053
Voltage
230-240V~50Hz
Power input
350W
No load speed
500-2500/min
Drilling capacity
13mm
Depth of throat
104mm
Table size
160mm x 160mm
Table bevel
0-45 degree
Speed steps number
5
Spindle taper
B13
Spindle travel
50mm
Machine weight
13.2kg
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the instruction
book carefully.
INTENDED USE
The machine is intended for drilling in metal, wood and
plastic.
ASSEMBLY INSTRUCTIONS
1. UNPACKING YOUR TOOL
Carefully unpack all of the contents and lay them out
on the floor (See Fig. A). To prevent corrosion some
of the parts have been coated in a fine layer of oil, it
is advised to assemble this product in a working area
to prevent damage to upholstery or carpets. Check
ABN: Australian Business Number. By this number,
business information such as entity type, status,
business location etc. can be found at website
http://abr.business.gov.au.
ABN of Positec Australia Pty Ltd is 14 101 682 357
