Rockwell RS8020, Instruction Manual

Page: 18 / 20

PETROL GRASS TRIMMER 26cc EN
18
TROUBLESHOOTING
If you experience problems, check the following;
Symptom Cause Solution
Engine will not start
ON/OFF switch STOP. Turn ON/OFF switch I.
Choke not OFF(cold engine) Move choke to the OFF position.
Out of Fuel.
Add fuel and press priming
bulb to fill carburetor.
Bad fuel, trimmer stored without
draining fuel, refueled with bad fuel.
Drain fuel tank and carburetor,
Refuel with fresh fuel mix.
Spark plug faulty, fouled ,or has
incorrect gap,
Fuel filter clogged, carburetor
malfunction, valves stuck, etc
Clean or replace the spark plug.
Check the spark plug gap.
Replace or repair faulty components
as needed.
Low Power or Engine Speed
won’t increase
Filter dirty or clogged. Check, clean or replace air filter.
Filter dirty or clogged.
Out of adjustment, broken, or bent.
Replace fuel filter,
Adjust cable, or replace if necessary.
Air filter clogged. Clean air filter.
Grass wrapped around output shaft or
cutting attachment.
Move ON/OFF switch to the STOP
position and disconnect the spark
plug cap from the spark plug. Remove
grass from output shaft and cutting
attachment area.
Idle speed too low. Adjust idle screw
Cutting-line head won’t turn Worn or cutting head, broken cable,
worn or broken gear case parts.
Replace or repair faulty components
as needed.
Excessive Vibration Cutting-line head loose. Tighten cutting-line head
Staple your purchase
receipt here
before returning this product for
warranty or any other reason, please call.
POSITEC AuSTRALIA PTy LIMITEd
AbN 14 101 682 357
unit 15, 23 Narabang way belrose 2085 NSw Australia
fREE CALL 1300 889 028
EMAIL:office.sales@positec.com.au