Rockwell RS8020, Instruction Manual

Page: 11 / 20

11
PETROL GRASS TRIMMER 26cc EN
qualified person. Contact the helpline for details of
approved service agents.
13. fuel Safety.
Warning: This product requires unleaded petrol and
2-stroke oil, ratio 40:1.
a) Always handle fuel with care. It is highly
flammable.
b) Use only an approved container for fuel storage
and mixing.
c) Never mix petrol/ oil in the machine fuel tank.
d) Do not smoke, and avoid sparks and flames near
fuel or unit.
e) Avoid spillage of fuel or oil. Wipe up all spillages
as quickly as possible.
f) Mix fuel outdoors where there are no sparks or
flames.
g) Do not inhale fuel fumes.
h) Move at least 3 meters (10 feet) from refueling
position before starting the engine. Stop the
engine and allow to fully cool before refueling or
storing the machine.
i) Never use exposed light bulbs while refueling.
j) Change your clothes if you spill fuel on yourself.
k) Keep petrol and oil away from eyes. If petrol
or oil comes in contact with eyes, wash them
immediately with clean water. If irritation is still
present, seek immediate medical help.
14. Transport, handling and storage of the unit
a) Switch off the engine when you cross roads or
gravel paths.
b) Always clean and maintain before storing, pay
special attention to the guards and cutting
attachments.
c) Before transporting the unit in a vehicle - stop
the engine and allow it to cool. Empty the fuel
tank and securely locate the unit.
d) When removing the tool from a vehicle or from
storage, be careful not to drop the engine on the
ground as this may severely damage the fuel
tank.
e) Never drag the tool across the ground, or throw it
to the ground - this is highly dangerous and will
damage the fuel tank, causing the fuel to leak,
possibly causing fire.
f) Remember when moving the equipment to lift it
the entirely from the ground.
15. Start and commissioning of the unit
a) For units with a clutch, check that the cutting
attachments stop turning when the engine is at
idles speed. Read instructions on filling of fuel
and oil, especially concerning fire precautions;
refer to carburetor adjustment section.
b) Read instructions on filling of fuel and oil,
especially concerning fire precautions and to
carburetor adjustment section.
c) Always switch off the engine and allow it to cool
before making any adjustments
d) Make sure all guards, straps, debris shield and
handles are properly and securely attached.
16. Rain
Never use the trimmer in rain or damp weather
conditions. Avoid cutting wet grass as you may slip.
17. Injuries by rotating parts.
Do not touch rotating or moving parts until they have
come to a complete stop.
Switch off the engine before attempting
maintenance.
Do not remove wrapped twigs or other debris
from moving or rotating parts whilst motor is
running. Switch off the engine before attempting
maintenance.
18. Transport, handling and storage of the unit,
Cleaning and maintenance before storage, including
the use of guards on cutting attachments with metal
blades.
AddITIONAL SAfETy RuLES fOR
yOuR GRASS TRIMMER
1. During assembly take great care when fitting the
guard, as this has a very sharp cutting edge at
one side for cutting the nylon line.
2. Never point toward other people or animals when
in use.
3. If the trimmer starts to vibrate excessively switch
off and have your dealer check the trimmer.
4. Do not cross roads or gravel paths when
operating.
5. On steep slopes you should cut across the grade
of the slope, never up and down.
6. Never use the trimmer in rain or damp weather.
Avoid cutting wet grass as you may slip.