Rockwell RS2112, User Manual

Page: 11 / 12

11
CORDLESS DRILL EN
3. I CANNOT FIT ThE BATTERy INTO ThE BATTERy
ChARgER. why?
a) Check if the charger and the battery pack are
specifically designed for working together.
b) The battery can be inserted into the charger only in
one direction. Turn the battery around until it can be
inserted into the slot, the indicator light should be red
when the battery is charging.
4. REASONS FOR DIFFERENT BATTERy PACK wORKINg
TIMES
Charging time problems, as above, and having not
used a battery pack for a prolonged time will reduce
the battery pack working time. This can be corrected
after several charge and discharge operations by
charging & working with your drill. Heavy working
conditions such as large screws into hard wood will
use up the battery pack energy faster than lighter
working conditions. Do not re-charge your battery
pack below 0
o
C and above 45
o
C as this will affect
performance.
REASONS FOR DIFFERENT
ChARgINg TIMES
The charging time can be affected by many reasons
which are not defects in your product.
If the battery pack is very hot it will not re-charge
because the internal temperature safety cutout will
prevent it. If the battery pack is very hot you must
remove your battery pack from the charger and allow
your battery pack to cool first to ambient temperature
and then recharging can be started.
MAINTENANCE
Your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
Staple your purchase receipt here
Before returning this product for
warranty or any other reason, please call.
POSITEC AuSTRALIA PTy LIMITED
ABN 14 101 682 357
unit 15, 23 Narabang way Belrose 2085 NSw
Australia
FREE CALL 1300 889 028
EMAIL:office.sales@positec.com.au