11
12V 3in1 SDS RotaRy HammeR
enG
sDs-plus tungsten carbide drill bits should always be used
for concrete and masonry.
always use a ¼” (6.35mm) hex magnetic bit holder when
using short screwdriver bits.
When drilling in metal, only use Hss drill bits in good
condition. Where possible, use a pilot hole before drilling a
large diameter hole.
PRoBlem ReSolution
1. ReaSonS foR DiffeRent BatteRy PaCK WoRKinG
timeS
short charging periods, or having not used a battery pack for
a prolonged time will reduce the battery pack working time.
This can be corrected after several charge and discharge
operations by charging & working with your tool. Heavy
working conditions such as drilling large screws into hard
wood will use up the battery pack energy faster than lighter
working conditions. Do not re-charge your battery pack
below 32°F (0°C) and above 113°F (45°C) as this will affect
performance.
maintenanCe
your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your power
tool. Wipe clean with a dry cloth. always store your power
tool in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust. Occasionally you may
see sparks through the ventilation slots. This is normal and
will not damage your power tool.
2-yeaR WaRRanty Statement
if your Rockwell tool becomes defective due to faulty
materials or workmanship within a period of 2 years
from the date of purchase, we guarantee to:
• Replace or repair all defective parts, free of charge, or,
• Repair products free of charge, or,
• Replace the unit with a new or re-conditioned unit,
free of charge.
your warranty is subject to the following conditions:
• Battery packs are guaranteed for a 12 month period
only.
• The tool has not been misused, abused, neglected,
altered, modified or repaired by anyone other than
an authorized service center.
• Only genuine Rockwell accessories and parts have
been used on or with the product
• The tool has been subjected to fair wear and tear.
• The tool has not been used for rental purposes.
• The tool has not sustained damage through foreign
objects, substances or accidents.
your warranty does not cover;
• Components that are subject to natural wear and
tear caused by use in accordance with operating
instructions.
• Unauthorized/improper maintenance/handling or
overload are excluded from this warranty as are
accessories such as bulbs, blades and bits, etc.
For guarantee claims, please contact the Rockwell
Helpline and you will need to submit a proof of purchase
in the form of a valid receipt that displays date and place
of purchase.
We may require the tool be sent postage prepaid to
an authorized service center, along with all original
equipment.
Rockwell Helpline 866-514-RoCK(7625)
This guarantee statement does not replace but is in
addition to your statutory rights.
This warranty does not apply to accessories supplied
with the tool.
This warranty applies only to the original purchaser and
may not be transferred.
all repairs and replacement tools will be covered by the
limited warranty for the balance of the warranty period
from the date of the original purchase.
limited 30-Day exchange policy
During the first 30 days after date of purchase, you may
exchange a tool which does not work properly due to
defects in materials or workmanship by returning the
power tool to the retailer where it was purchased. To
receive a replacement power tool, you must present
a dated proof of purchase and return all original
equipment packaged with the original product. The
replacement power tool will be covered by the limited
warranty for the balance of the two year period from the
date of the original purchase.