1/2˝ 7.0A hAMMER DRILL
ENG
9
MAINTAIN TOOLS wITH CARE
Remove the plug from the socket before carrying out
any adjustment, servicing or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
TROUbLESHOOTING
1 If your drill will not operate, check the power at the
electrical plug.
2 If the drill is not cutting properly, check the drill bit for
sharpness, replace drill bit if worn. Check that the drill is
set to forward rotation for normal use.
3 If a fault can not be rectified return the drill to an
authorized dealer for repair.
wARRANTy
LIMITED 30-DAy ExCHANGE POLICy
During the first
30 days after date of purchase, you may
exchange a tool which does not work properly due to defects in
materials or workmanship by returning the power tool to the re-
tailer where it was purchased. To receive a replacement power
tool, you must present a dated proof of purchase and return all
original equipment packaged with the original product.
LIMITED TwO yEAR wARRANTy
The manufacturer warrants that, for a period of 2 years from the
date of purchase, this product shall be free of defects in materi-
als and workmanship. We will repair or replace, at our option,
this tool during the warranty period, and we may require that
the tool be sent postage prepaid to an approved service center
with all original equipment and a dated proof of purchase. Any
replacement or repaired power tool will only be covered by the
limited warranty for the balance of the warranty period from the
date of the original purchase.
wHAT IS NOT COvERED
This warranty applies only to the original purchaser at retail and
is not transferable.
This warranty does NOT cover service or replacement of parts
resulting from normal wear.
This warranty does NOT cover accessories or battery packs.
This warranty does NOT cover malfunction, failure or defects
due to:
a) abnormal use, abuse, neglect, or use not in accordance with
the operations manual
b) damage resulting from accidents, drops or mishandling of
the tool
c) alteration or repairs by other than approved service centers
d) commercial or rental use.
The manufacturer makes no warranties, representations or
promises as to the quality or performance of its power tools
other than those specifically stated in this warranty.
FOR SERvICE
Contact our toll-free consumer service line at 1-866-514-7625
to receive a replacement tool or to be directed to an approved
service center. When you make a warranty claim or send the
tool for warranty service, you must also include a dated proof
of purchase.
ADDITIONAL LIMITATIONS
This warranty is only valid for products purchased and used in
the United States of America, its territories or Canada. Any im-
plied warranty granted under state law, including warranties of
merchantability or fitness for a particular purpose, are limited
to two years from the date of purchase. The manufacturer is
not responsible for direct, indirect, incidental or consequen-
tial damages including, but not limited to, liability for loss of
income arising from the purchase or use of the product. Some
states and provinces do not allow limitations on how long
an implied warranty lasts and/or do not allow the exclusion
or limitation of incidental damages, so the above limitations
and exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which
vary from state to state or province to province.
The manufacturer declines any responsibility in regards to
civil liability arising from abusive use or not in conformity with
proper use and maintenance of the machine as described in the
operator’s manual.
After the purchase, the manufacturer recommends
proper maintenance of the machine and to read the
operator’s manual before using the machine.
