Rockwell Automation Allen-Bradley VersaView 5000 ThinManager Series User Manual Download

Page: 61 / 72

Rockwell Automation Publication 6200-UM001C-EN-P - July 2018

Install Accessories

Appendix A

Install the Machine
Mounting Bracket Kit

There are two available machine mounting bracket kits.

• Cat. no. 6200V-BXMACH can be used on non-display VersaView

ThinManager thin client and industrial computers (cat. nos.
6200T-KB, 6200T-NA, and 6200P-NS3xx). Installation instructions
start on

page 61

• Cat. no. 6200V-BXMACH2 can be used on non-display VersaView

ThinManager thin client multi-4K display models (cat. nos.
6200T-RC and 6200T-RE). Installation instructions start on

page 64

For Non-display VersaView ThinManager Thin Client and Industrial
Computers (cat. nos. 6200T-KB, 6200T-NA, and 6200P-NS3xx)

To install the machine mounting bracket kit (cat. no. 6200V-BXMACH),
perform the following steps.

1. Follow the steps for

Pre-configuration on page 52

2. With a Torx 10 key or screwdriver, remove the two screws shown below

on the bottom of the non-display thin client or industrial computer.

3. Remove the four screws that secure the factory-installed mounting plate

to the back of the non-display thin client or industrial computer.

4. Install the new backplate from the machine mounting bracket kit with

the four screws that you removed in step 3.

IMPORTANT

The two available machine mounting bracket kits cannot be
installed on the VersaView 5200 ThinManager thin client single
display model (cat. no. 6200T-BA).

Summary of Contents for Allen-Bradley VersaView 5000 ThinManager Series









































































Search results

Summary of Contents for Allen-Bradley VersaView 5000 ThinManager Series

Reviews:

Related manuals for Allen-Bradley VersaView 5000 ThinManager Series

Brands by name

Popular brands

Rockwell Automation Allen-Bradley VersaView 5000 ThinManager Series, User Manual

Search results

Summary of Contents for Allen-Bradley VersaView 5000 ThinManager Series

Reviews:

Related manuals for Allen-Bradley VersaView 5000 ThinManager Series

Brands by name

Popular brands