manualshive.com logo in svg

Rockwell Automation Allen-Bradley PowerFlex 755T Series, Programming Manual, Page: 91 / 130

Share
Download
Rockwell Automation Allen-Bradley PowerFlex 755T Series Programming Manual Download Page 91

Rockwell Automation Publication 750-PM101B-EN-P - April 2022

91

Chapter 4          Troubleshooting

Power Layer Interface (PLI) Circuit Board Status Indicators

PowerFlex 755T power modules use status indicators and a 7-segment display 
to report conditions. The power layer interface circuit board is located behind 
the connections cover of the power module chassis.

Name

Color

State

Description

DS3

Green

Flashing at 2 Hz

Active mode in process.

Flashing at 0.5 Hz

Update in process.

Green / 

Yellow

Flashing Alternately Login mode in process.

Green / 

Red

Flashing Alternately Erase in process.

Yellow

Flashing at 2 Hz

Loopback fiber test mode is in process.

Flashing at 0.5 Hz

Boot mode is in process.

Red

Blink 2 Count

Clock fault

Blink 3 Count

Firmware fault

Blink 4 Count

FLEXBUS fault

Blink 5 Count

PRGM fault

Blink 6 Count

FPGA PRGM fault

Blink 7 Count

SFLASH PRGM fault

DS5/DS6

Green

Flashing

Fiber connection is online.

Red

Flashing

Fiber connection is offline.

Lit Segment

Description

Fiber loss

The PLI is not online.

The PLI is online but not initialized or logged in.

The PLI is initialized and logged in.

The right display indicates the module number (Lx/Mx). This display indicates that the module is 

in a ready state.

The PLI is initialized, logged in, and PWM active.

The right display indicates the module number (Lx/Mx).

The PLI is initialized, logged in, and faulted.

The right display indicates the module number (Lx/Mx).

The PLI initialization is complete.

Fiber is online.

The PLI is faulted.

PWM is enabled.

Frame 8 and larger board orientation shown. Frame 7 is the opposite orientation.

DS5

7-Segment Display

DS6

DS3

Frame 8 and Larger 

Power Module

Frame 7 Power Module

Connections Cover

Right 
Display

Left 
Display

Summary of Contents for Allen-Bradley PowerFlex 755T Series



































































































































Reviews:

No comments