manualshive.com logo in svg

Rockwell Automation Allen-Bradley PowerFlex 6000T, Installation Instructions Manual

Share
Download
Rockwell Automation Allen-Bradley PowerFlex 6000T Installation Instructions Manual Download Page 5

Rockwell Automation Publication 6000-IN100B-EN-P - October 2020

5

Preface

About This Publication

This manual provides procedural information for installing PowerFlex® 6000T 
medium voltage drives.

Download Firmware, AOP, 
EDS, and Other Files 

Download firmware, associated files (such as AOP, EDS, and DTM), and access 
product release notes from the Product Compatibility and Download Center at 

rok.auto/pcdc

. 

Who Should Use This 
Manual

This manual is intended for use by professional riggers, general contractors, 
electrical contractors, or plant operations personnel familiar with moving and 
siting heavy equipment. Specific experience with solid-state variable speed 
drive equipment is NOT required for this part of the installation process, but is 
mandatory for subsequent processes.

What Is Not in this Manual

This manual provides information specific for installing a PowerFlex 6000T 
drive. It does not include project-specific, or drive-specific topics such as:

•

Dimensional Drawings (DD) and Electrical Drawings (ED) that are 
generated for each customer’s order.

•

Spare parts lists compiled for each customer’s order. 

•

Drive-specific technical specifications.

For additional product detail or information relating to PowerFlex 6000T 
drives, see the publications listed in 

Additional Resources on page 6

.

Required Supplemental 
Information

This manual includes generic information about the drive cabinet layout 
orientation and generic electrical connection information. 

Review the project-specific Dimensional Drawings (DDs) and Electrical 
Drawings (EDs) to better understand the specific drive system cabinet 
orientation and wiring requirements before performing any mechanical or 
electrical work. Paper copies of the DDs and EDs are placed in the document/
hardware box in the Isolation Transformer Cabinet before shipment. Contact 
the local Rockwell Automation office to obtain digital copies, if required.

Summary of Contents for Allen-Bradley PowerFlex 6000T













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands