background image

Rockwell Automation Publication 1734-IN032F-EN-P - September 2022

13

POINT I/O 4 Channel High Density Current Input Module Installation Instructions

Environmental Specifications

Attribute

Value

Temperature, operating

IEC 60068-2-1 (Test Ad, Operating Cold),

IEC 60068-2-2 (Test Bd, Operating Dry Heat),

IEC 60068-2-14 (Test Nb, Operating Thermal Shock):

-20 °C 

 Ta 

 +55 °C (-4 °F 

 Ta 

 + 131 °F)

Temperature,

surrounding air, max

55 °C (131 °F)

Temperature, nonoperating

IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),

IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),

IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock):

-40…+85 °C (-40…+185 °F)

Relative humidity

IEC 60068-2-30 (Test Db, Unpackaged Damp Heat):

5…95% noncondensing

Vibration

IEC 60068-2-6, (Test Fc, Operating):

5 g @ 10…500 Hz

Shock, operating

IEC 60068-2-27 (Test Ea, Unpackaged Shock):

30 g

Shock, nonoperating

IEC 60068-2-27 (Test Ea, Unpackaged Shock):

50 g

Emissions

CISPR 11

Group 1, Class A

ESD immunity

IEC 61000-4-2:

6 kV contact discharges

8 kV air discharges

Radiated RF immunity

IEC 61000-4-3:

10V/m with 1 kHz sine-wave 80% AM from 80…6000 MHz

EFT/B immunity

IEC 61000-4-4:

±3 kV at 5 kHz on power ports

±3 kV at 5 kHz on signal ports

Surge transient immunity

IEC 61000-4-5:

±1 kV line-line(DM) and ±2 kV line-earth(CM) on power ports

±2 kV line-earth(CM) on shielded ports

Conducted RF immunity

IEC 61000-4-6:

10V rms with 1 kHz sine-wave 80% AM @ 150 kHz…80 MHz

Certifications

Certification (when product is marked)

(1)

Value

c-UL-us

UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.

UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.

UK and CE

UK Statutory Instrument 2016 No. 1091 and European Union 2014/30/EU EMC Directive, compliant with:

EN 61326-1; Meas./Control/Lab., Industrial Requirements

EN 61000-6-2; Industrial Immunity

EN 61000-6-4; Industrial Emissions

EN 61131-2; Programmable Controllers (Clause 8, Zone A and B)

UK Statutory Instrument 2012 No. 3032 and European Union 2011/65/EU RoHS, compliant with:

EN IEC 63000; Technical documentation

Ex
 

UK Statutory Instrument 2016 No. 1107 and European Union 2014/34/EU ATEX Directive, compliant with:

EN IEC 60079-0; General Requirements

EN IEC 60079-7; Explosive Atmospheres, Protection "e"

II 3 G Ex ec IIC T4 Gc

DEMKO 04 ATEX 0330347X

UL22UKEX2478X

IECEx

IECEx System, compliant with:

IEC 60079-0; General Requirements

IEC 60079-7; Explosive Atmospheres, Protection "e"

II 3 G Ex ec IIC T4 Gc

IECEx UL 20.0072X

EAC

Russian Customs Union TR CU 020/2011 EMC Technical Regulation

RCM

Australian Radiocommunications Act, compliant with:

AS/NZS CISPR 11; Industrial Emissions

Summary of Contents for Allen-Bradley POINT I/O 1734-IE4C

















Reviews: