56
Rockwell Automation Publication LDAT-UM001A-EN-P - April 2016
Chapter 5
Maintenance
8.
Remove screws that mount the power and feedback connectors to the
stator body.
9.
Slide the connectors out of the stator body.
10.
Slide the slider and coil assembly from the stator body until the internal
encoder connector is exposed.
Complete this step without affecting the position of the coil on the
slider.
11.
Disconnect the internal encoder connector.
12.
Remove the slider assembly and coil completely from the stator body.
Assemble the Linear Thruster
Follow this procedure to assemble your linear thruster. Use the figures from the
disassemble procedure as a reference.
1.
Slide the slider and coil assembly into the stator body and connect the
encoder connectors when they are close enough.
2.
Carefully stuff the feedback then power cables into the stator body.
ATTENTION:
The coil is held to the magnet track on the slider by the
magnetic forces. Do not let it move or attempt to move it while
attempting repairs. Moving the coil makes reassembly difficult.
ATTENTION:
The coil is held to the magnet track on the slider by the
magnetic forces. Do not let it move or try to move it while attempting
repairs. Moving the coil makes reassembly difficult.