Rockwell Automation Publication LDAT-UM001A-EN-P - April 2016
25
Installation
Chapter 2
Torque nut to 33.9 N•m (25.0 lb•ft).
5. Remove three screws that secure the slider-end cap and discard.
6. Install the counter-balance and slider-end cap the screws that came with
the kit.
7. Torque to values shown in table.
8. Screw one 3/8 in. hex nut onto a spring anchor.
9. Install hex nut and spring anchor assemble in the counter-balance
bracket.
Torque nut to 33.9 N•m (25.0 lb•ft).
Attach your counter-balance spring between the two spring anchor pins.
LDAT Frame Size
S1
S1 Torque
N•m (lb•in)
S2
S2 Torque
N•m (lb•in)
30
M8 x1.25 x 40
13.5 (10.0)
M6 x1.0 x 30
9.0 (6.6)
50
M10 x1.5 x 50
33.9 (25.0)
M10 x1.5 x 30
33.9 (25.0)
75
100
M12 x1.75 x 60
54.8 (40.4)
150
M14 x2.05 x 60
84.7 (62.5)