Industrial 15" Flat Panel Monitor
21
Publication 6185-5.1
Step 7 - Adjust the clock phase
1.
Highlight the Basic Adjustment option on the main menu and press
the Select button. Then highlight the Clock Phase (pixel adjust)
option and press the Select button.
2.
Use the Up and Down buttons to adjust the clock phase until the
screen image is sharp and there is no screen “jitter.” The change
should be most apparent in the vertical lines of the screen. Press the
Select button to save the setting
Step 8 - Adjust the brightness
To obtain the best display, first set the brightness control to the
appropriate setting under the lighting conditions in which the monitor
will be used.
Note:
Allow time for the backlight on the monitor to warm up
completely before you adjust the brightness control.
1.
Highlight the Basic Adjustment option on the main menu and press
the Select button. Then highlight the Brightness option and press the
Select button.
2.
Adjust the brightness value to its lowest setting.
3.
Adjust the brightness until the black bar at the top of the screen
changes from black to dark gray.
4.
Adjust the brightness down until the bar changes back to black. This
is the optimal brightness setting given the current lighting
conditions.
5.
Press the Select button to save the setting.