10
Rockwell Automation Publication 871FM-UM002A-EN-P - April 2017
Chapter 1
Product Overview
Features
• 10…30V DC operating voltage
• Stainless steel housing
• Equal sensing for both steel and aluminum
• IP67/IP69K rated
• 3- or 4-wire operation
• IO-Link communication protocol helps minimize downtime and
increase productivity
• IO-Link sensors are forward/backward compatible with standard
sensors: the same sensors and same cables that are used in IO-Link and
non-IO-Link applications
• IO-Link provides
– Remote detection of the health of the sensor
– Margin status (low alarm)
– Timer function
Specifications
Attribute
General-purpose
Weld Field Immune
Load Current
≤ 100 mA; Auto detect (PNP/NPN) at power-up
Leakage Current
≤ 10 µA
Operator Voltage
10…30V
Voltage Drop
≤1.8V
Switching Frequency
≤200 Hz
≤50 Hz
Power-On Delay (Time delay before
availability)
<80 ms
No-Load Supply Current
≤10 mA
Repeatability
≤5%
Hysteresis
5% typical
Protection Type
False pulse on power, transient noise, reverse polarity, short circuit, and overload
Certifications
c-UL-us Listed and CE Marked for all applicable directives
Enclosure Type Rating
IP69K
IP67
Housing Material
Stainless Steel 303 with Stainless Steel face
Factor-1 equal sensing
Yes
Connections
203.2 mm (8 in.) pigtail with 4-pin Micro QD
Operating Temperature
-25…+70 °C (-13…+158 °F)
Storage Temperature
-40…+70 °C (-40…+158 °F)
Operating Humidity
5…95% relative (noncondensing)
Shock
30 g (1.06 oz) with 11 ms pulse duration
Vibration
55 Hz, 1 mm amplitude
IO-Link
Protocol
IO-Link V1.1
Interface Type
IO-Link
Mode
COM 2 (38.4 kBd)
Cycle Time
10.4 ms, minimum
SIO (standard I/O)
Supported (pin 4 for either IO-Link or SIO)