manualshive.com logo in svg

Rockwell Automation Allen-Bradley 856T-B24LC, User Manual, Page: 7 / 82

Share
Download
Rockwell Automation Allen-Bradley 856T-B24LC User Manual Download Page 7

Rockwell Automation Publication 856T-UM001B-EN-P - April 2021

7

Preface

This manual is a reference guide for the 856T-B24LC IO-Link module for 
Control Tower™ stack lights. It describes the procedures to install, wire, and 
troubleshoot this device.

Who Should Use This 

Manual

Use this manual if you design, install, program, or troubleshoot systems that 
use the 856T-B24LC module for stack lights.

You must have a basic understanding of electrical circuitry and familiarity 
with safety-related systems. If you do not, obtain the proper training before 
using this product.

Qualified personnel must conduct all inspections. A qualified person must 
perform these tasks:

•

Undergone the appropriate technical training

•

The responsible machine operator has instructed personnel in the 
operation of the machine and the current safety guidelines.

•

Has read and has access to the user manual.

Abbreviations

Download Firmware, AOP, 

EDS, and Other Files 

Download firmware, associated files (such as AOP, EDS, and DTM), and access 
product release notes from the Product Compatibility and Download Center at 

rok.auto/pcdc

.

Abbreviation Description

ADC

Automatic Device Configuration

AOI

Add-On Instruction

AOP

Add-On Profile

ASN

Application-Specific Name

IEC

International Electrotechnical Commission

IOOD

I/O Device Description

NEC

National Electric Code

QD

Quick disconnect

RGB

Red, green, blue

SIO

Standard I/O

IO-Link module

Tower light IO-Link Class B light and sound module controller

856T-B24LC
IOLD
POST

IO-Link module power on self test

Summary of Contents for Allen-Bradley 856T-B24LC



















































































Reviews:

No comments