24
Rockwell Automation Publication 6181X-IN002D-EN-P - February 2020
Industrial Computers for Hazardous Locations
For a PCI add-in card:
a. Remove the three screws that secure the add-in card tray.
For the screw locations, see the figure in
.
b. Remove the add-in card tray.
c. Remove the two screws that connect the factory-supplied PCIe riser card to the
add-in card tray.
d. With the two screws that you removed, connect a PCI riser card (such as Cat. No.
P6189X-PCIRISER) to the add-in card tray.
e. Replace the add-in card tray.
Tighten its three screws in the order shown in the following figure so that the PCI
riser card is connected securely to the motherboard.
f. Connect the PCI add-in card to the corresponding slot on the PCI riser card.
g. Verify that the add-in card is properly seated in the riser card slot.
h. Use the slot cover screw to secure the add-in card to the slot.
7.
Connect the necessary cables to the add-in card.
See the documentation that came with the card.
8.
Reinstall the computer cover as detailed in
Reinstall the Cover on page 21
2
1
3
