Publication 6181P-UM001G-EN-P - July 2008
41
Replace System Components
Chapter
4
4.
Remove the screw(s) that fasten the floppy drive bracket to the
chassis.
5.
Slide the floppy drive and bracket and lift the floppy drive out
door-first.
6.
Disconnect the flat cable at the floppy drive.
7.
Remove the four screws securing the floppy drive to the bracket.
8.
Remove the floppy drive.
Install the Floppy Disk Drive
Follow these steps to install the floppy disk drive.
1.
Fasten the floppy disk drive to the floppy disk drive bracket
with four screws.
2.
Connect the flat cable to the floppy disk drive.
3.
Insert the floppy disk drive and bracket into the chassis
adapter-end first and slide it into position within the chassis.
4.
Fasten the floppy disk drive and bracket to the chassis with the
bracket screw.
5.
Apply glue to prevent separation.
6.
Reinstall the hard disk drive.
7.
Reinstall the back cover.
Floppy Drive
bracket
Floppy Drive
Floppy Adapter
1500P and 1700P
