background image

8

     Industrial Integrated Display Computers

Publication 6181P-IN010C-EN-P - December 2009

Installation Guidelines

Follow these guidelines to make sure your product provides safe and reliable service.

The installation site must have sufficient power.

The enclosure must allow sufficient space around air inlets and outlets to provide the 
circulation necessary for cooling. Never allow air passages to become obstructed.

The

 

ambient air temperature must not exceed the maximum operating temperature. 

Consider heat produced by other devices in the enclosure. You may need a 
user-supplied fan, heat exchanger, or air conditioner to meet this condition.

The humidity of the ambient air must not exceed specified limits. In very dry 
environments, static charges build up readily. Proper grounding of the equipment 
helps to reduce static discharges, which may cause shocks and damage electronic 
components.

The enclosure or cover must remain in place at all times during operation. The cover 
provides protection against high voltages inside the product and inhibits 
radio-frequency emissions that might interfere with other equipment.

When mounted, the product cannot be tilted more than ±60° from vertical.

ATTENTION

To maintain an electrically safe installation, the AC powered products must be plugged 
into a grounded outlet.

TIP

Hot air rises. The temperature at the top of the enclosure is often higher than the 
temperature in other parts of the enclosure, especially if air is not circulating.

IMPORTANT

The product can operate at a range of extremes. However, the life span of any electronic 
device is shortened if you continuously operate the product at its highest rated 
temperature.

Summary of Contents for Allen-Bradley 6181F-12TPWE





























Reviews: