manualshive.com logo in svg

Rockwell Automation Allen-Bradley 193-DNENCAT, User Manual

Share
Download
Rockwell Automation Allen-Bradley 193-DNENCAT User Manual Download Page 66

66

Rockwell Automation Publication 193-UM014A-EN-P - July 2011

Chapter 8

        E-mail/Text

2.

Enter the Device Identity information into the fields as described below. 

3.

Click the Apply Changes button to save the configuration. 

Text Notifications

The Ethernet/IP Communications Auxilliary can send a text message to a 
wireless phone be e-mailing the wireless phone’s service provider. The format for 
the text message is provided by the service provider and looks similar to the 
example formats below. 

Device Name

The name of the Ethernet/IP Communications Auxilliary.

Device Description

The description of the Ethernet/IP Communications Auxilliary.

Device Location

The location of the Ethernet/IP Communications Auxilliary.

Contact Information

The contact information for the Ethernet/IP Communications 
Auxilliary.

Device X Name

The name of the DeviceNet device being scanned. 

Device X Description

The description of the DeviceNet device being scanned. 

AT&T™

10-digit wireless phone [email protected]

Sprint®

10-digit wireless phone [email protected]

Summary of Contents for Allen-Bradley 193-DNENCAT



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands