Rockwell Automation Allen-Bradley 1606-XLDF240F, Reference Manual, Page: 16 / 26

16 Rockwell Automation Publication 1606-RM124A-EN-P - September 2021
DC/DC Converter - 48V/48V, 5 A, 240 W Reference Manual
Approved, Fulfilled, or
Tested Standards
For the most current information, visit rok.auto/literature and use 1606-CT as
your search criterion.
Regulatory Product Compliance
Physical Dimensions and
Weight
Approval Names Approval Symbols Notes
CE Declaration of
Conformity
The CE marking indicates conformance with the EMC Directive
ANSI/UL 61010-2-201
(former UL 508)
Listed as Open Type Device for use in Control Equipment UL
Category NMTR, NMTR7
EAC TR Registration
Registration for the Eurasian Customs Union market
(Russia, Kazakhstan, Belarus)
Regulation
Names
Regulation Symbols Notes
RoHS Directive
Directive 2011/65/EU of the European Parliament and the
Council of June 8th, 2011 on the restriction of the use of
certain hazardous substances in electrical and electronic
equipment.
REACH Directive
Directive 1907/2006/EU of the European Parliament and the
Council of June 1, 2007 regarding the Registration,
Evaluation, Authorization, and Restriction of Chemicals
(REACH).
Ind. Cont. Eq.
Attributes Values and Descriptions
Width 42 mm (1.65 in.)
Height 124 mm (4.88 in.)
Depth
117 mm (4.61 in.)
The DIN rail height must be added to the unit depth to calculate the total required installation
depth.
Weight 500 g (1.1 lb)
DIN rail
Use 35 mm (1.38 in.) DIN rails according to EN 60715 or EN 50022 with a height of 7.5 mm
(0.295 in.) or 15 mm (0.59 in.).
Housing material
• Body: Aluminum alloy
• Cover: Zinc-plated steel
Installation clearances
(1)
(1) The device is designed for convection cooling and does not require an external fan. Do not obstruct airflow and do not cover
ventilation grid.
Keep the following mininmum installation clearances:
• 40 mm (1.57 in.) on the top
• 20 mm (0.79 in.) on the bottom
• 5 mm (0.2 in.) on the left side
• 5 mm (0.2 in.) on the right side
If the adjacent device is a heat source, increase the side clearances from 5 mm (0.2 in.) to
15 mm (0.59 in.).
When the device is permanently loaded with less than 50%, the 5 mm side clearance can
be reduced to zero.
Penetration protection Small parts like screws and nuts with a diameter larger than 3.5 mm (0.14 in.).