ac/dc (120V) Isolated Input Module
7
Publication 1771-IN070B-EN-P - August 2002
Swing thechassis locking bar down into placeto secure
themodules. Makesurethelocking pins engage.
1771ĆA1B, ĆA2B, ĆA3B, ĆA3B1, ĆA4B I/O chassis
1771ĆA1B, ĆA2B, ĆA3B1, ĆA4B Series B I/O chassis
locking tab
card guides
Module
Module
19809
card guides
locking bar
locking bar pin
Snap thechassis latch over
thetop of themoduleto secureit.
17643
wiring arm
remove
horizontal bar
Attach thewiring arm (1771ĆWN) to thehorizontal
bar at thebottom of theI/O chassis.
Thewiring arm pivots upward and connects with
themoduleso you can install or removethe
modulewithout disconnecting thewires.
1771ĆWN
The 1771–ID16/B module is a modular component of the 1771 I/O
system requiring a properly installed system chassis. Refer to
publication 1771–IN075 for detailed information on acceptable
chassis, proper installation and grounding requirements. Limit the
maximum adjacent slot power dissipation to 10W maximum.
