INSTALLATION
Please follow the directions below for safely hanging the Spyder LED on a truss.
You will need a 5mm Allen wrench, an adjustable wrench, and pliers. Please use
a safety cable when hanging the fixture. This will prevent any injuries in the event
that the fixture falls.
C
STEP 1
Attach the black mounting bracket (A) to your the
mounting clamp.
**PLEASE NOTE: Your mounting clamp may
differ from the one used in our installation in-
structions. Make sure to refer to your clamp’s
specific mounting instructions for proper use.
STEP 2
Attach the bracket to the bottom of the unit using
the included Allen bolts (B).
A
B
STEP 3
Attach the clamp to a truss. Adjust the angle (C)and
direction (D) as needed. Next, tighten the wing nut (E).
D
C
E
