12
4- to 16-Ohm Direct Speaker Output (Binding Post Terminals)
You can connect two speakers to this terminal as long as the final impedance does not
fall below 4 ohms. Although it is possible to connect more than two speakers to these
terminals, it is not recommended. Please consult a professional if you intend to do so as
incorrect installation could lead to irreparable damage to your amp and speakers.
4-Ohm Direct Speaker Connection (wired in series)
8-Ohm Direct Speaker Connection (wired in series)
8 ohm
8 ohm
8 ohms at terminal
4 ohms at terminal
4 ohm
4 ohm
Connections
(continued)
CAUTION:
We recommend you
consult a professional if you plan on
wiring more than 2 speakers to the 4-
to 16-ohm output.
WARNING:
Do not use Direct Output (binding
posts) and Zone Output (screw connectors) at
the same time. Doing so will cause permanent
damage to the amp.
WARNING:
Total impedance of your speakers must not be less than 4 ohms.
fall below 4 ohms. Although it is possible to connect more than two speakers to these
terminals, it is not recommended. Please consult a professional if you intend to do so as
incorrect installation could lead to irreparable damage to your amp and speakers.
incorrect installation could lead to irreparable damage to your amp and speakers.
CAUTION:
We recommend you
consult a professional if you plan on
wiring more than 2 speakers to the 4-
to 16-ohm output.
WARNING:
Total impedance of your speakers must not be less than 4 ohms.
4-Ohm Direct Speaker Connection (wired in series)
4 ohm
wiring more than 2 speakers to the 4-
to 16-ohm output.
8-Ohm Direct Speaker Connection (wired in series)
4 ohms at terminal
Summary of Contents for RCS650-6
Page 2: ...2...
