Rocktron VooDu Valve Online User Manual Download Page 30 | Manualshive

Page: 30 / 105

background image

28

The CHORUS function is available only in configurations displaying “CRS” in the

configuration title.

The Chorus effect in the Voodu Valvedddd is produced by using two delayed signals

(Voice 1 and Voice 2), detuning these delayed signals (slightly changing their pitch), then
modulating the detune effect so that the amount of pitch detune is constantly varying.
Using different detune amounts, modulation rates, modulation depths and pan settings for
each delayed signal will produce a greater perceived spaciousness.

The PARAMETER SELECT control will allow you to access these CHORUS parameters:

CHORUS Function

The CHORUS I/O parameter determines whether the Chorus is active
or bypassed for the current preset.

The LEVEL 1 parameter determines the volume of Voice 1 in relation
to Voice 2. The DIR/EFF MIX parameter in the Mixer function also
determines the Chorus level.

The PAN 1 parameter allows you to pan Voice 1 to the left or right
channel.

The DEPTH 1 parameter adjusts the amount of modulation of the Voice
1 signal. A lower depth setting will produce a more subtle detune effect,
while a higher setting will produce a more extreme detuning of Voice 1.

The RATE 1 parameter determines the sweep speed (or the speed at
which Voice 1 is modulated). Lower parameter settings will result in
slower speeds, while higher settings will result in faster speeds.

The DELAY 1 parameter allows you to select the minimum delay time
(in milliseconds) for Voice 1. This delayed signal (along with Voice 2)
is detuned and modulated to produce the chorus effect. Using shorter
delay times will result in a tighter sounding chorused signal, while
longer delay times will produce a larger ambient effect.

The LEVEL 2 parameter determines the volume of Voice 2 in relation
to Voice 1.

CHORUS I/O

LEVEL 1

PAN 1

DEPTH 1

RATE 1

DELAY 1

LEVEL 2

«
...
28
29
30
31
32
...
»

Summary of Contents for VooDu Valve Online










































































































Reviews:

No comments

Related manuals for VooDu Valve Online

Brand: 5Core Pages: 2

Brand: DAD Pages: 24

Brand: Pangea Pages: 7

Axiom HPD3400PFC

Brand: PROEL Pages: 24

Brand: Boston Pages: 22

Brand: Rotel Pages: 146

Brand: Siegmund Pages: 10

Brand: JDS Labs Pages: 4

Brand: Calyx Pages: 8

Brand: MTX Pages: 14

Brand: JBL Pages: 2

Livin Loud SX1250.1

Brand: Kicker Pages: 42

Brand: K&K Sound Pages: 2

Brand: Denon Pages: 13

Brand: WORLD DESIGNS Pages: 11

CX-8088 170.353

Brand: Citronic Pages: 2

Brand: Kustom Pages: 4

Brand: HAMTRONICS Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands