Rocktron INTELLIFEX LTD User Manual Download Page 46 | Manualshive

Page: 46 / 60

background image

43

Turn the PARAMETER ADJUST control to scroll through the available parameters for the
current configuration.

PARA1

XXX

Step 5

Turning the PARAMETER SELECT control one step clockwise will display the effect
parameter that is currently mapped to the NUMB1 control number.

PARA1 EFFECTS LVL

Step 6

After selecting the parameter to be assigned to the NUMB1 controller, press the STORE
button to save it. "STORED" will flash briefly on the display.

Step 7

STORED

The Intellifex allows for the range of any given parameter to be limited when using a MIDI
controller to determine the current parameter value. For example, if a given parameter has
a range from -

∞

to +6dB yet it is desirable for the full range of the controller to vary from

only -10dB to +2.5dB, a lower limit of -10 and an upper limit of +2.5 may be set via the
"Upper Limit" and "Lower Limit" parameters. When storing a parameter, the maximum
value is stored as the upper limit and the minimum value is stored as the lower limit auto-
matically.

NOTE

Turn the PARAMETER SELECT control to display the next parameter - "Controller Upper
Limit".

Step 8

ULIM C1

XXX

Use the PARAMETER ADJUST control to select the highest parameter value that the
controller is not to exceed.

Step 9

ULIM C1

+2.5

Step 10

After selecting the value for the upper limit, press the STORE button to save it. "STORED"
will again flash briefly on the display.

STORED

«
...
44
45
46
47
48
...
»

Summary of Contents for INTELLIFEX LTD





























































Reviews:

No comments

Related manuals for INTELLIFEX LTD

Brand: JBL Pages: 47

Brand: Russell Hobbs Pages: 20

Brand: ROHS Pages: 50

Brand: DAS Pages: 44

Brand: Vitesse Home Pages: 7

Brand: Vitesse Home Pages: 8

Brand: Moulinex Pages: 15

Ma Cuisine CS 5200

Brand: MAGIMIX Pages: 128

Brand: ZiLOG Pages: 268

Brand: TE Pages: 7

Brand: Panasonic Pages: 10

Brand: Electrolux Pages: 10

Brand: KitchenAid Pages: 369

Brand: KitchenAid Pages: 3

Brand: KitchenAid Pages: 40

Brand: KitchenAid Pages: 42

Brand: KitchenAid Pages: 27

Brand: KitchenAid Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands