manualshive.com logo in svg

Rocktron HUSH Ultra, Instruction Manual

The Rocktron HUSH Ultra is a powerful noise reduction system designed for musicians seeking studio-quality sound. For a seamless setup and optimal performance, make sure to consult the detailed and comprehensive Instruction Manual. Download it for free from manualshive.com to unlock the full potential of your HUSH Ultra and enjoy clean, distortion-free tones.

Share
Download
background image

33

The MIDI IN in the HUSH Ultra will allow you to select presets directly from a MIDI controller such 

as the Rocktron MIDI XChange, MIDI Mate, All Access or All Access LTD.  Follow the connection 

steps in the CONNECTIONS section of this manual.  

Please note that though the HUSH Ultra has a 7 Pin din connector any standard 5 pin MIDI cord may be 

used for device connections.  This 7-pin DIN connector must be connected to the MIDI OUT jack of the 

transmitting MIDI device via a standard MIDI cable, or to the MIDI THRU jack of the preceding MIDI 

device (if the HUSH Ultra is within a chain of MIDI devices). Pins 6 and 7 of this connector carry 

phantom power to power a Rocktron MIDI foot controller (MIDI XChange, All Access and MIDI Mate) 

when a 7-pin MIDI cable is used.

MIDI IN

The MIDI OUT/THRU in the HUSH Ultra will allow you to transmit and control other MIDI capable 

devices thru the HUSH Ultra.  Follow the connection steps in the CONNECTIONS SECTION of this 

manual.   Follow the connection steps in the CONNECTIONS section of this manual.

This standard 5-pin DIN connector can be connected to the MIDI IN jack of another device via a stan-

dard MIDI cable. There are limitations to the number of devices that can be chained (or series connect-

ed) in this fashion.

Note: Inherently in MIDI there is a limit to the number of devices which can be chained together (con-

nected in series). With more than 3 devices, a slight distortion of the MIDI signal can occur (due to 

signal degradation) which can cause an error in MIDI signal transmission. Should this problem arise, a 

MIDI Thru box can be used which connects directly to the MIDI device which transmits MIDI infor-

mation and has multiple connectors for the multiple devices receiving MIDI. MIDI cables should not 

exceed 50 feet (15 meters) in length.

MIDI OUT/THRU

Summary of Contents for HUSH Ultra







































Reviews:

No comments

Related manuals for HUSH Ultra

Brands by name

Popular brands

Load more brands