manualshive.com logo in svg

Rocktron HUSH Ultra, Instruction Manual

The Rocktron HUSH Ultra is a powerful noise reduction system designed for musicians seeking studio-quality sound. For a seamless setup and optimal performance, make sure to consult the detailed and comprehensive Instruction Manual. Download it for free from manualshive.com to unlock the full potential of your HUSH Ultra and enjoy clean, distortion-free tones.

Share
Download
background image

2

Copyright © 2009 GHS Corporation

All Rights Reserved.

Your HUSH

®

 Ultra noise reduction system has been tested and complies with the following Stan-

dards and Directives as set forth by the European Union:

 

 

Council Directive(s):

 

 89/336/EEC 

Electromagnetic Compatibility

 

 

Standard(s):

 

 

 EN55013, EN50082-1

This means that this product has been designed to meet stringent guidelines on how much RF 

energy it can emit, and that it should be immune from other sources of interference when properly 

used. Improper use of this equipment could result in increased RF emissions, which may or may 

not interfere with other electronic products.

To insure against this possibility, always use good shielded cables for all audio input and output 

connections. Also, bundle audio cables separately from the AC power cables. These steps will help 

insure compliance with the Directive(s).

For more information about other Rocktron products, please see your local dealer or one of our 

importers closest to you (listed on the enclosed warranty sheet).

Summary of Contents for HUSH Ultra







































Reviews:

No comments

Related manuals for HUSH Ultra

Brands by name

Popular brands

Load more brands