manualshive.com logo in svg

Rocktron HUSH Ultra, Instruction Manual

The Rocktron HUSH Ultra is a powerful noise reduction system designed for musicians seeking studio-quality sound. For a seamless setup and optimal performance, make sure to consult the detailed and comprehensive Instruction Manual. Download it for free from manualshive.com to unlock the full potential of your HUSH Ultra and enjoy clean, distortion-free tones.

Share
Download
background image

31

Any or all of the HUSH Ultra's presets may be dumped to another HUSH Ultra a sequencer or MIDI 

utility program using a PC midi interface to create a ( .syx ) file.  All the information about the presets 

you have created will be dumped consisting of parameter values, title characters and controller assign-

ments. When dumping a single preset into another HUSH Ultra, the dumped preset can be loaded into 

any preset location on the receiving unit.

Note: The HUSH Ultra midi data when sent by external means such as a PC MIDI utility program you 

will need to configure it as stated below. 

Buffer size 264 bytes

No of buffers 16 both RX and TX

100ms between buffers be used initially as a starting point.

100ms after F7 [ optional ]

If a MIDI sequencer is used to store the data record the Sysex data in real-time or adhere to the param-

eters given above.

MIDI DUMP/LOAD

Step 2

Step 3

  M I D I   D U M P / L O A D

Step 1

Connect a standard MIDI cable from the MIDI OUT of the transmitting HUSH Ultra 

to the MIDI IN of the receiving HUSH Ultra.  Consult MIDI Connection drawing for 

more information.

If you are dumping a single preset to another HUSH Ultra, the transmitting HUSH 

Ultra must have that preset selected.

Press the "STORE/EDIT" button to enter into the "EDIT MODE".  Turn the  FUNC-

TION SELECT knob to MIDI DUMP/LOAD.

Step 4

On the receiving HUSH Ultra use the PRESET Select control to select the preset 

location where the received preset will be stored.  Note that the preset currently stored 

at the selected location will be lost when the new preset is received.

Summary of Contents for HUSH Ultra







































Reviews:

No comments

Related manuals for HUSH Ultra

Brands by name

Popular brands

Load more brands