Rocks OK-03.4130, Manual

Page: 24 / 106

24
EN
3.3 Charging station installation
- Choose best installation place, please make sure it is
flat, no water, no magnetic interference and no obstacle
in the front of charging station.
Charging station best install place:
1. Make sure it is flat
2. No magnetic interference
3. No water and far away from puddle
4. No obstacle in front of charging station
- Please fix the charging station on horizontal place and
correct direction.
- Lay virtual wire
as picture shows.
- Fix the charging station
with four stakes by hammer.
3.4 Virtual wire installation
The virtual wire can be installed in one of the following
ways:
- Securing the wire to the ground with pegs.
It is preferable to staple down the virtual wire, if you
want to make adjustments to the virtual wire during the
first few weeks of operation.
- Bury the wire
It is preferable to bury the virtual wire(max depth: 5cm)
if you want to detach or aerate the lawn.
If necessary both methods can be combined so
one part of the virtual wire is stapled down and the
remainder is buried.
- Install virtual wire with pegs 1 meter apart. It’s best
to use smooth radius corners than sharp angles. See
pictures.
- Bury virtual wire below grass and fasten it on the
ground with pegs, so that the mower should not cut
the wire.
- A minimum distances between the front of the
charging station and an obstacle is 2 meters. And make
sure the distance from corner to front of charging
station is at least 2.5 meters. Make sure to lay a 2.5
meters minimum straight-light of virtual wire in front of
charging station.
- If a high obstacle, for example a house, wall, fence or
other obstacle which is higher than the cutting lawn
borders the working area, the virtual wire should be
laid at least 40cm from the obstacle. This will prevent
mower from colliding with the obstacle.
- If a passage or a ground with same height of cutting
lawn, the virtual wire should be laid at least 10cm from
the edge.
- A minimum distance between the pool edge of virtual
wire is 40cm.
- A minimum distance between two corners is 1 meter.
- A maximum distance of the virtual wire to and from
the island is 1cm, and fix the two wires with one peg.
- There are two types of set up of the virtual wire
around the charging station.
Put the charging station near corner, please take
location for reference.
Please make sure to set a straight-line at least of 2.5m
in front of charging station. The charging station should
be far away from puddle.