Charging from wall charger:
Using the included AC charging adapter, plug your Rockpower 1300 into
any wall outlet. You will know the Rockpower 1300 is fully charged when
the LCD display shows number 100%.
Charging from solar panel:
The DC input and PV port are compatible with charging from solar panels.
1. Place your solar panel where it will get as much direct sunlight as possible.
2. Solar charge times depend on weather conditions.
04
03
LCD Display
Charging Your Rockpower 1300
INPUT:
Shows the amount of power (watts) going into the
Rockpower 1300 while charging.
OUTPUT:
Shows the amount of power (watts) your devices
are using while plugged into the Rockpower 1300.
BATTERY
LEVEL:
Shows 5 segments, approximating 20%-40%-60%-80%-
100% capacity. When charging your Rockpower 1300,
you will notice a battery segment blinking, this indicates
the current charge status. Once fully charged, all battery
segments will be lit and remain solid.
OVERLOAD
WARNING:
Power draw exceeds port's maximum allowance,
indicated by red light on the port's button.
TEMPERATURE
WARNING:
The unit is over-heating.
IMPORTANT NOTE:
When solar recharging your Rockpower 1300, take
note of the voltages of the solar panels. Individual solar panels, or solar
panels chained in series in excess of 26V cannot be used with the
Rockpower 1300 and can cause serious damage to the unit.
Charging from your car:
Although not recommended because of slow charge time, you can
charge your Rockpower 1300 from any 12V source, like your car.
50Hz 60Hz
F
C
OUTPUT
WATTS
INPUT
WATTS
BATTERY LEVEL
INPUT
OUTPUT
TEMPERATURE
WARNING
COOLING FAN
OVERLOAD WARNING
FREQUENCY
