8
6. Set the unit upside down again, this time on blocks
of wood so the router’s collet will be able to extend
through the center hole in the plate.
>
Porter-Cable routers have four locating pins. Align these
pins with the grooves machined into the Pro Lift
housing (and Adapter Collars). Fig. 7.
>
On Porter-Cable 890 routers, you must first remove
the factory height adjustment rack from the motor body
before inserting the router into the adapter. Fig. 8.
Fig. 7
Fig. 8
Fig. 9
7. Slide your router motor into the housing (and Adapter
Collar, if being used), stopping just before the motor contacts
the Insert Ring release arm.
Fig. 9.
Locating Pins
Housing
Grooves
Height Adjustment Rack
must be removed before
motor is installed in Pro Lift
Maintain gap
Insert Ring
release arm
>
Unplug your router motor before installing or removing it
or adjusting the Pro Lift router housing.
>
To avoid serious injury and damage to your router and
the Pro Lift, the router motor MUST be securely
mounted in the Pro Lift’s housing. Outside bolts on the
housing should be checked and retightened, if necessary,
with each use.
