7
Fig. 10
Fig. 11
7.
Starting with the upper left corner of your first side
assembly, fasten the Upper Front Stretcher (1)
perpendicular to the Left Leg (5) with a 5/16-18
Bolt (10) and 5/16-18 Nut (11), using the hole closest
to the inside corner of the Left Leg (5).
Fig. 6.
8.
Move to the upper right corner and fasten the Upper
Front Stretcher (1) perpendicular to the Right Leg (6)
with a 5/16-18 Bolt (10) and 5/16-18 Nut (11), using
the hole closest to the inside corner of the Right
Leg (6).
Fig. 7.
9.
Move to the lower left corner, fasten the Lower Front
Stretcher (3) perpendicular to the Left Leg (5) with
a 5/16-18 Bolt (10) and 5/16-18 Nut (11), using the
hole closest to the inside corner of the Left Leg (5).
Fig. 8.
10.
Move to the lower right corner and fasten the Lower
Front Stretcher (3) perpendicular to the Right Leg (6)
with a 5/16-18 Bolt (10) and 5/16-18 Nut (11), using
the hole closest to the inside corner of the Right
Leg (6).
Fig. 9.
11.
At this point your first side assembly should look
like
Fig. 10.
12.
Place the second side assembly over the assembly
with front stretchers attached. Attach the second side
assembly with 5/16-18 Bolts )10) and 5/16-18
Fig. 12
Nuts (11), using the hole closest to the inside corner
of each front stretcher.
Fig. 11.
Squaring the Pack Rack
®
1.
Bring the Pack Rack
®
to an upright position;
lay a carpenter’s square flat on the bottom inside
ledge of the rack and adjust to square. Move
to the opposite corner and repeat.
Fig. 12.
Since
there is only one bolt in all corners, the rack will
be easy to adjust for flat and square.
3
1
3
1
1st assembly
1st assembly
2nd assembly
