background image

4

Enclosures

Carton Contents

• 

T1 Subwoofer with Trim Ring

• 

(12) Mounting Screws

• 

(4) Trim Ring Screws

• 

(1) Socket head driver bit

• 

Installation and Operation Manual

Recommended Enclosures

This manual outlines two specific types of enclosures that provide distinctly dif-
ferent performance. This section is to help you decide which type is best for your 
application.

Sealed Enclosures

Sealed enclosures are the simplest to build. The most important part of building 
a sealed enclosure is to make sure that the enclosure is airtight. Using glue and 
some type of sealant on all seams will ensure solid construction and prevent air 
leaks. The box volume will directly impact the performance of the speaker. Larger 
enclosures will provide flatter response and deeper bass where smaller boxes will 
provide a bump in the response curve and generally higher output for greater SPL.

Advantages of sealed enclosures:

• Small 

enclosures

• 

Linear (Flat) response

• 

No port noise

• 

High power handling at all frequencies

• 

Excellent for sound quality

• 

Extended low frequency output when compared to vented enclosures

Vented Enclosures

Vented enclosures vary only from the sealed enclosure in that a vent or port is 
added to “tune” the enclosure. The enclosures recommended are designed for 
great overall performance. Larger boxes tend to be easy to tune to lower frequen-
cies while medium and small boxes are easier to tune to higher frequencies. The 
vented design is less linear in response than the sealed box but with noticeably 
more output at the tuning frequency.

Advantages of vented enclosures:

• 

Higher average output than sealed

• 

Tuning frequency can be easily adjusted by changing port length

• 

Deep bass response with lower power requirements

• 

Great for high output with limited power

Vented vs Sealed

The graph shown here is a sample of how the F3 drop-off point differs between 
sealed and vented enclosures.

Building an Enclosure

To work properly, the walls of the enclosure must be rigid and not flex when sub-
jected to the high pressures generated by the speaker’s operation. For optimum 
performance, we recommend using 3/4” MDF (Medium Density Fiberboard) and 
internal bracing. The enclosure should be glued together and secured with nails 
or screws.

Calculating Volume

Calculating volume is merely a matter of measuring the dimensions in inches and 
using the formula: H x W x D divided by 1728 (cubic feet). See block below.

Box Volume

Height” x Width” x Depth” 

Divided by (cubic feet)

1728

If two facing sides are of uneven length, add them together and divide by two to 
take the average. Using this number will give you the volume without the necessity 
of calculating the box in sections and adding the sections together. The thickness 
of the baffle material reduces the internal volume so this must be subtracted from 
the outside dimensions to determine the internal volume. The speaker itself also 
reduces the internal volume. The amount of air displaced by each model is listed 
on the specification sheet and should also be subtracted from the gross volume 
calculation.

Sealed Enclosure

NOTE: Vb is the internal volume, before any speaker and/or port dis-
placement is added. All external dimensions were based on the use of 
3/4” (1.90cm) materials.

NOTE:

 When using enclosures other than recommended, call Technical Support 

for correct application. 

Optimum Sealed Enclosure Recommendation

Sealed Enclosures

10”

12”

Total Internal Volume cu. ft. (Liter)

0.80 (22.62)

1.15 (32.56)

Woofer Displacement cu. ft. (Liter)

0.03 (0.82)

0.11 (3.11)

V

b

 - Internal Area cu. ft. (Liter)

0.77 (21.8)

1.04 (29.45)

F

3

 - 3dB Point (Hz)

40.3

39.9

Qtc - Enclosure Damping

1.10

1.18

H - Height  - inch (cm)

12 (30.48)

14.5 (36.83)

W - Width - inch (cm)

18 (45.72)

22.5 (57.15)

D - Depth - inch (cm)

9.5 (24.13)

9.5 (24.13)

Recommended Sealed Enclosure Volume Range

Sealed Enclosures

10”

12”

V

b

 - Volume range cu. ft. 

(Liter)

0.5 to 1.0

(14.16 to 28.32)

0.75 to 1.25

(21.24 to 35.40)

60.0

70.0

80.0

90.0

100.0

110.0

120.0

130.0

10.0

20.0

40.0

60.0

80.0

100.0

200.0

Frequency, Hz

Sealed Box

Vented Box

H

W

D

Summary of Contents for T1S1-10










Reviews: