Genelec HTS2Home Theater Subwoofer
Operating
Manual
Page 1: ...Genelec HTS2 Home Theater Subwoofer Operating Manual ...
Page 2: ...correct voltage and that the correct fuse for that voltage is fitted Connectthesubwoofertothedecoder s line level Subwoofer Out LFE channel connector See Fig 1 above Audio input is made via a 10 kOhm balanced XLR or unbalanced RCA connector If the signal source has suitable balanced outputs we recommend using the XLR connector and balanced interconnect cables due to their better resistance to inte...
Page 3: ...ds the nearest wall Setting the Phase Setting the Phase Setting the Phase Setting the Phase Setting the Phase Control Control Control Control Control The effect of incorrect phase alignment betweenmainspeakersandsubwoofer is a drop in the frequency response of the whole system at the crossover frequency The graphs below figure 3 Figure 3 The effect of phase difference between the subwoofer and the...
Page 4: ...ted 12 m cube anechoic chamber at 1 m using calibrated 12 m cube anechoic chamber at 1 m using calibrated 12 m cube anechoic chamber at 1 m using calibrated 12 m cube anechoic chamber at 1 m using grade 1 measuring equipment Input signal levels were grade 1 measuring equipment Input signal levels were grade 1 measuring equipment Input signal levels were grade 1 measuring equipment Input signal lev...
