23
T
ROUBLESHOOTING
– O
PTIONAL
CD C
HANGER
Error 1
(Initialize Error)
Disc unit can’t detect magazine
Press the eject button and pull out the
magazine. Press the reset button
S
YMPTOM
D
IAGNOSIS
R
EMEDY
Magazine load/unload problem
Check tray load/unload area
Magazine sensor is defective
Have a service center check the magazine
sensing switch
Error 2
(Magazine Eject
Error)
Can’t eject magazine
Press the reset button
Magazine emitting spring is
damaged
Have a service center inspect and repair as
necessary
Magazine tray is jammed
Inspect and repair as necessary
Error 3
(Loading Error)
Tray loading has not completed
after 5 seconds
Press Eject, pull out the magazine, and try
again. Press Reset
Loading mechanism and motor
(or driving circuit) is defective
Repair mechanism and loading motor (or
driving circuit)
Error 4
(Unloading Error)
Tray unloading has not
completed after 5 seconds
Press Eject, pullout the magazine, and try
again. Press Reset
Unloading mechanism and
motor (or driving circuit) is
defective
Have a service center repair mechanism and
loading motor (or driving circuit)
Error 7
(Focus Error)
The laser pick-up is defective
Repair the laser pick-up
Disc is warped or damaged
Put in a new disc
Error 5
(Elevator Error)
Magazine tray is jammed
Repair CD changer mechanism; then press
Reset
Disc is warped or damaged
Put in a new disc
Error 9
(TOC Error)
The laser pick-up is defective
Have a service center repair the laser pick-up
NO CD
(No Disc Error)
Magazine is empty or not
installed in the unit
Check the magazine and insert discs
NO CONN
(Communication
Error)
8-pin DIN cable is
disconnected from the CDX
mechanism or source unit
Check the connection of 8-pin DIN cable
between the CDX and unit
CD Changer does
not operate
CDX cable is intermittent or
severely damaged
Check connections and repair or replace CDX
cable as necessary
CDX cable is disconnected from
the Source Unit or CD Changer
Check connections at the Source unit and CD
Changer and repair wiring as necessary
Communication issue
Press Reset on CD Changer
Disc is jammed in
the CD Changer
Disc load/unload problem
Press Reset on CD Changer. If CD Changer still
does not operate, see your Local Authorized
Rockford Fosgate Dealer
Summary of Contents for RFX9220
Page 8: ...8 INSTALLATION SOURCE UNIT FEATURES ...
Page 32: ...8 Français CARACTÉRISTIQUES DE L APPAREIL INSTALLATION ...
Page 74: ...26 Español NOTA ...
Page 75: ...27 NOTA ...