15
Chapter 1: Understanding Your New System
ACCU-CHEK Customer Care Service Center 1-800-858-8072
Coding the Meter
1.
Remove and throw away the old
code key.
2.
With the meter off, slide the new
code key into the code key slot.
It should easily snap into place.
3.
Press and release
to turn the
meter on.
4.
Make sure the code on the
display matches the code on the
test strip vial.
▲
!
A new code key is included in every box of test strips. Change the code key every
time you open a new box of test strips.
Notes:
• If “---” appears on the display, turn off
the meter, make sure the code key is all
the way in, then turn on the meter again.
• Do not force the code key into the meter:
it only goes in one way - numbers out
and ridges up.
• If the code number on the display does
not match the code number on the test
strip vial, call the ACCU-CHEK Customer
Care Service Center at
1-800-858-8072.
▲
!
Be sure the code key matches the code on the test strip
container. If they don’t match, you could get inaccurate results.
47133_ADV3_Dom_Manual 3/29/10 11:29 AM Page 15
