INSTRUCTION MANUAL
ASSEMBLY, INSTALLATION, USE AND MAINTENANCE.
Rev. 11/2012
Rocam Losi s.r.l. declines every responsibility on any print and/or transcription mistake contained in this booklet
Rocam Losi s.r.l. can change features and datas of this booklet with the proposal of keeping on increase the quality of its products.
Anytime and without notice
, this booklet can’t be considered as contract with third parties.
2
We thank you for purchasing a ROCAM LOSI product, designed and manufactured to be
used in professional working environment.
1. Instruction warnings
The user must hold the whole instructions and store up this booklet in case of use.
The manufacturer does not assume any responsibility for damages incurred due to the
failure of improper use of this manual.
All measures in this manual are expressed in mm.
2. Safety and Right use warnings
The Rocam Losi products meet the latest technological evolutions and
current safety guidelines.
The thermic trolleys of line
TORO
, object of this booklet, are projected to be
in compliance with directives and field laws in order to guarantee a safe and
reliable product.
Any other use will be considered inapposite to the original destination.
Producer do not assume any responsibility for damages caused by an improper use.
Responsibility lies only on user.
A proper use also includes compliance with the instructions for use and installation and
any additional documentation as well as the conditions of inspection and maintenance.
3. Warranty
Due to commercial and manufacturing requirements, the producer reserves the right
to make changes that will improve the use and the quality of its products. Rocam Losi s.r.l.
in compliance with European Community legislation grants its products for 12 months.
This warranty does not include electrical parts, labour and all replacements related
to an improper use of the good. Any manipulation carried out automatically excludes the
liability of the manufacturer.
The products or parts to be replaced or repaired for unequivocal defects in
workmanship and materials used must be in a “free port” at the offices of the producer,
who after a careful inspection, will repair or replace them.
The repairs are carried out exclusively at the headquarters of the manufacturer, and
none cost incurred by the customer for repairs will be refunded by the manufacturer unless
expressly agreed.
