INSTRUCTION MANUAL
ASSEMBLY, INSTALLATION, USE AND MAINTENANCE.
Rev. 11/2012
Rocam Losi s.r.l. declines every responsibility on any print and/or transcription mistake contained in this booklet
Rocam Losi s.r.l. can change features and datas of this booklet with the proposal of keeping on increase the quality of its products.
Anytime and without notice
, this booklet can’t be considered as contract with third parties.
10
5. Cleaning and maintenance
WARNING:
Before any cleaning operation unplug the device from the electrical
system. Never wash the appliance with water jets in order to prevent
water seepage inside the electrical components.
Before any cleaning operation wait for the appliance to be cooled down
(wait at least one hour from the end of the service).
The thermic trolley should be cleaned with specific cleansers for stainless
steel and the chromed parts with alcohol or specific cleansers for chrome
finish. In any case do not use abrasive products.
The trolley is supplied with a safety thermostat set to 150°C, which works in case of
malfunction of the electronic thermostat. To reset the system following an interruption due
to the safety thermostat, unscrew the control panel (see n.35 page 5) and push the red
button on it.
5.1 Breakdowns
Problem
Possible cause
Solution
The trolley does not
heat up
Power cut
Check the power presence
in the electricity network.
The heating element is burned
Contact the retailer
The thermostat is broken
Contact the retailer
The power switch is broken
Contact the retailer
