14
7. Connecting the power supply
(1) Insert the power plug in the wall outlet.
CAUTION:
Be sure to turn on the power only after installation
of the product is completed.
Do not insert the power plug in the outlet while
touching the toilet seat. The shower nozzle
(posterior, bidet) may not extend if this happens.
If the shower nozzle does not extend, pull out the
power plug, then insert it again without touching the
toilet seat.
(2) Confirm that the system has been turned on.
Confirm that the power lamp on the body is lit.
8. Positioning the remote control unit
(1) Open the back cover of the remote control unit and
insert the batteries (four AA size batteries).
CAUTION:
Be careful to insert the batteries with the positive
and negative poles facing the correct direction.
Do not mix new and old batteries when changing
the batteries in the remote control unit.
(2) Place the remote control unit in the position you
would like it to be in, sit down on the toilet seat and
press the stop switch. If you hear an electronic
"beep" sound from the shower toilet body, that
confirms that the remote control unit works in that
position.
CAUTION:
If the shower or the bidet
button is pressed, water will
be sprayed. Be aware that.
Make sure there is adequate
space directly above the
remote control unit to enable
free removal from and return
to the bracket.
Attach a grounding cable securely.
* There is danger of electric shock if there is a
breakdown or current leakage.
* If there is no ground terminal in the outlet, consult
your local electrician.
WARNING
Necessary Space
Back Cover
Battery
Power Plug
Power Lamp
+
–
+
–
–
+
–
+
