Robust 43.452.82, Original Operating Instructions

Page: 16 / 44

앬 Wear suitable clothes. Never wear loose fitting
clothes or jewelry. Keep hair, clothes and
gloves away from moving parts.
Loose clothing, dangling jewelry and long hair can
be caught by moving parts.
앬 If dust extraction and dust collection devices
can be mounted, ensure that these are
connected and are properly used.
The use of a dust extraction system can reduce the
danger posed by dust.
4. Using the treatment of electric tools
앬 Do not overload your tool. Only use suitable
electric tools to perform your work.
Using the right electric tool allows you to work
better and safer within the toolʼs quoted capacity
range.
앬 Do not use an electric tool whose switch is
defective.
An electric tool that no longer can be switched on
or off is dangerous and must be repaired.
앬 Pull the plug out of the socket and/or remove
the battery before making any adjustments to
the tool, changing accessories or put the tool
down.
This precaution eliminates the possibility of
inadvertently starting the tool.
앬 When not in use, store electric tools out of the
reach of children. Do not allow those persons
to use this tool who are unfamiliar with it or
who have not read these instructions.
Electric tools are dangerous when they are used
by inexperienced persons.
앬 Take good care of your tool. Check that
moving parts properly function and do not jam,
that parts are not broken off or damaged in any
way and that the tool can be used to its full
capacity. Have damaged parts repaired prior to
using the tool.
The cause of many accidents can be traced back
to poorly maintained electric tools.
앬 Keep your blades sharp and clean .
Properly maintained blades with sharp edges jam
less frequently and are easier to use.
앬 Make sure to use electric tools, accessories,
attachments, etc. in accordance with these
instructions. Take the conditions in your work
area and the job in hand into account.
Using electric tools for applications other than
those intended can lead to dangerous situations.
5. SERVICE
앬 Have your tool repaired only by authorized
specialists using original replacement parts.
This will ensure that your tool remains safe to use.
Special safety instructions
Always secure the workpiece if possible: Use
clamps or a vise to hold the workpiece securely. This
is far safer than holding it in your hand and also
means that you have both hands free to operate the
electric tool.
앬 Ensure that there are no foreign objects adhering
to the workpiece in order to avoid damaging the
electric hand plane.
앬 Hold the tool by its handle using both hands and
place the front base plate of the plane on the
workpiece. The base plates must evenly rest on
the workpiece during the planing process.
앬 Allow the tool to reach its maximum operating
speed before you start to plane.
앬 Let the plane run to a complete stop before
you set the tool down. An exposed knife block
can catch the surface, lead to loss of control
and, ultimately, serious injury.
앬 Set the planing depth to 0 mm when you have
finished working.
앬 Replace used planing knives with a set of new
knives when worn down.
앬 Some types of planing knives have two blades.
When one blade has become blunt, the planing
knife can be turned over.
앬 Blunt planing knives cannot be resharpened.
앬 Always ensure that you replace both knives at the
same time.
앬 Only the original, manufacturer-approved knife
block may be used for this electric hand plane.
앬 Always use only clean and sharp planing knives to
ensure professional, safe results.
Do not lose these safety regulations.
16
GB
Anleitung_RB_PL_900_SPK7__ 17.07.12 11:05 Seite 16