ROBUA QAC34/101, Installation Manual

Page: 44 / 48

Appendix A: technical data
44
7
Outputs
Relay outputs QX1...QX5
• Current range
• Switching ON current
• Total current
• Voltage range -
AC 0,02…2 (2) A
max. 15 A for ≤1 s
max AC 10 A (total, all 230 VAC outputs)
AC 24 - 230 V (for voltage-free contact outputs)
Triac output ZX6
• Current range
• Switching ON current
• Total current -
AC 0,02 - 2 (2) A (On/Off operation); AC 0,02 - 1,2 (1,2) A (speed control)
max. 4 A for ≤1 s
max AC 10 A (total, all 230 VAC outputs)
Analogue outputs UX1, UX2, UX3
(UX3 on connector X75)
• Output voltage
• Current
• Ripple
• Zero level accuracy
• Error over rest of range Safety Extra Low Voltage (SELV)
outputs with short-circuit protection
Uout = 0...10,0 V
max ±2 mA RMS; ±2,7 mA peak
≤ 50 mVpp
< ± 80 mV
≤ 130 mV
Outputs PWM UX1, UX2, UX3
(UX3 on connector X75)
• Output voltage
• Current
• Frequency Safety Extra Low Voltage (SELV)
outputs with short-circuit protection
High level 10 VDC, low 0 VDC
Ux = min. 6 V @ 5 mA
3 kHz
Digital outputs D1, D2, D3 (on connector
X75)
• Output voltage
• Current
Internal pull-up
High level 12 VDC, low 0 VDC
max, 2,5 mA
Power G+
• Output voltage
• Current Safety Extra Low Voltage (SELV), outputs with short-circuit protection
11,3…13,2 V
max. 88 mA
Power GX1 (configurable)
• Output voltage 5 V
• Output voltage 12 V
• Current Safety Extra Low Voltage (SELV), outputs with short-circuit protection
4,75…5,25 V
11,3…13,2 V
max. 20 mA
Interfaces
BSB
• Base unit/peripheral cable length
• Total cable length
• Cross section Two-wire connection (not invertible)
max. 200 m
max. 400 m (max. cable capacity: 60 nF)
min. 0,5 mm²
LPB (optional with LPB OCI345.06/101
adapter connected to X70)
Cable length:
• with power from controllers on bus (per
controller)
• with central power on bus
• Bus load number
copper cable 1,5 mm²
two-wire connection (not invertible)
-
max. 250 m
max. 460 m
E = 3
Modbus (optional with OCI350.01 Modbus
adapter on X60)
for details, see the OCI350.01 Modbus adapter technical data
Protection rating and safety
class
Enclosure protection rating per EN60529 IP 00 (without enclosure)
Safety class per EN60730 safety class II for LV parts, if correctly installed
Degree of contamination per EN60730 degree of contamination normal
Standards, safety, EMC, etc.
CE conformity (EU) CE1T2355xx04
Climatic conditions
Storage, per EN60721-3-1
Transport, per EN60721-3-2
Operation, per EN60721-3-3 class 1K3, -20 - 65 °C
class 2K3, -25 - 70 °C
class 3K5, -20 - 50 °C (non condensing)
Weight Packaging excluded 193 g