25
8.3 Driving steps
Step 1:Starting M1
By press the button at the back to
M1
to start it up ,then you can see the indication light turn on. If the indication light keep
flashing that means the machine operates normally.
Step 2: prepare to get onto M1
There are two sensors under each pedal, they can detect the pressures when user step on it. According to the tilt relation
between the
M1
and user, there are two situations:
1
M1
tilts more, user put one foot on the pad, then
M1
will vibrate to let the user know the tilt angle is too large, please don’t get
on
M1
;
2
M1
tilts less, user put one foot on the pad,
M1
automatically balance to the vertical posture after the sensors sense the user.
The buzzer gives out “drip” sound, which indicates that the system has entered the manned work mode.
Step 3:Get on M1, control M1 forward and backward
Put one foot on
M1
gently first, then the other foot. The user should keep the balance of body gravity when standing on
M1
,which can make
M1
hold still. Lean your body gently forward or backward to make
M1
go forward or backward, please
remember do not lean your body too much.
Step 4: change direction
Lean the handlebar left or right to make
M1
turn left or right.
Step 5: Get off M1
Keep
M1
motionless and balanced before getting off from it .Get off one foot first ,then the other one.
Please don’t shake the handlebar violently, which will increase the
probability of accidents .
Try to maintain balance for M1 when step down.
Summary of Contents for Robin M1
