11
4.3 Display board
The display board of M1 is located on the top of the battery. It shows information about M1 when it is working.
A
Display board of power consumption.
After a fully charge all five
lights will be always on normally. Each of them means 20% of power. If
four lights are on it means there is 60%-80% left.
B
The green indication light.
It will keep flashing in normal situation
when it is turned on. Always on when charging. If something go wrong it
will not turn on.
C
The red indication light. It mean system error when it is on.
D
Indication light of Bluetooth.
4.4 Pedal sensor
There are two sensors under each pedal, once any of them feels the pressure when the user stand on it, M1 will enter
into the balance model automatically.
Please make sure that your feet are standing on the pedals .
Please don’t put any objects on the pedals, it will keep the system operate and
increase the possibility of collision and even damage to M1, also might cause
physical injuries to users.
Summary of Contents for Robin M1
