Robotics Bigmow, User Manual

Page: 23 / 28

BIGMOW
Maintenance of the
BIGMOW.
BIGMOW.
The blades are the principal elements that give
a good result. It is advisable to check them at
least once a month and the replace them when
they are broken.
For one season,
the user must
have two sets of
blades (15
pieces per set). It
is advisable to
change them at
the beginning of
the season and
then in the course of the month of June (the
grass is thicker at that time).
To change a blade (machine switched off, pro-
tective gloves on), position the hole in the pro-
tective disc over the screw holding the blade in
place, and unscrew it without holding the blade.
Once the screw has been removed, take hold of
the blade, tilt it and remove it carefully. Take
the new blade and carry out the opposite opera-
tion, screwing the blade securely into place.
If you have any doubts about changing or fixing
your blades, do not hesitate to contact your lo-
cal distributor.
Cutting blades
Maintenance of the Bigmow is important. Regular checks can improve the day-to-day quality of
mowing. You may wish to refer to the maintenance summary sheet for further help.
1. Machine OFF, protective gloves on
2. Turn machine over
3. Position hole in disc over head of
screw holding blade in place
4. Unscrew blade
5. Remove blade from support
6. Insert new blade and screw into place.
Changing cutting blades
3.Position hole
4.Unscrew
5.Remove blade
PAGE 23