Robotics Bigmow, User Manual

Page: 15 / 28

3.
BIGMOW
Cutting heights of the
BIGMOW.
BIGMOW.
Adjusting the cutting height
The cutting height can be adjusted between
0.75 and 3.75 inches in 12 positions. This se-
lection is made by means of a sliding bar under
the cover. To change cutting height, lift the
maintenance pin (the small ball) and slide the
selection bar (the large ball). Each position
raises or lowers the height one quarter of an
inch.
When using Bigmow for the first time or when it
has not been used for a few days, the lawn may
be too thick or too long. It is then advisable to
increase the cutting height for a few days and
then reduce it gradually. When the height of the
grass is irregular, the Bigmow systematically
mows those places where the grass is too long.
Progressive lowering of the cutting height gives
an optimum return in relation to consumption
and wear and tear.
1. Open cover
2. Lift selection pointer/indicator pin
3. Slide selection bar to chosen height
4. Release pin
5. Close cover
Adjusting the cutting height
2.
1.
PAGE 15