Robot System Products P6413, Product Manual

Page: 37 / 44

M0620-1 ver 2.8 37
4.5.2 Replacement of signal pins (STC-2508E only)
Replace a signal pin when the spring jams, or become bent.
Action Note
1 Power off Switch the power off and lock the
circuit breaker.
2 Remove signal pins Pull out the signal pins with a pair of
pliers.
NOTE! There are totally 20 signal
pins.
3 Replace signal pins Fit the new signal pins by pushing
them into the sleeves.
NOTE! The brass coloured part of
the signal pins should be pressed
fully into the sleeve.
4 Power on Unlock the circuit breaker and
switch the power on.
4.6 Complete service of swivel tool changer
We recommend a complete service on swivel tool changers to be carried out every 5 years. This
will ensure proper function and increase the lifespan of the swivel tool changer considerably. We
further recommend that the maintenance shall be carried out by qualified RSP personnel. Please
contact us for a quotation.
The 5 year swivel tool changer service at Robot System Products includes inspection and
cleaning of the full unit, replacement of all wear parts including sealings and signal pins.